If we're talking TD here, remember that the first 8000 or so TDs used BSF.
Cheers,
Lew Palmer
-----Original Message-----
From: owner-mg-t@autox.team.net [mailto:owner-mg-t@autox.team.net] On Behalf
Of PopeyMike@aol.com
Sent: Thursday, September 02, 2004 7:23 AM
To: seaweednh@comcast.net; sallen3663@gmail.com
Cc: mg-t@autox.team.net
Subject: Re: Nut Size?
Scott:
I agree with the 1 1/4 socket size. I had the same problem - mine had not
been removed in 25 years. I put a breaker bar with a 8' pipe over the
handle
and it came off very easily. The inch size seems to be a better fit and
will
not round out the corners.
Michael Balahutrak
53 TD
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|