Bob wrote:
> When I started up from a stand still I ether
> squealed the tires or stalled the engine. But I must admit that this problem
> went away once the engine mount was firmed up. So maybe I'm just wasting
> money on the cable.
I have a late TD with the clutch rod. I also rebuilt another
early 52 TD with the rod set up. I have never had any problem
with the clutch take up when everything was in good condition and
installed correctly. I suspect you either had an adjustment
problem with the operating mechanism, the pressure plate wasn't
releasing properly, or oil or some other contamination on the
driven disk.
|