I agree with Terry, 7 1/4" clutch TD gearbox will not bolt into a TF unless
you change the bell housing. There are other minor internal
differences/improvements between the two boxes. A 7 1/4" clutch/bell
housing TD box ( early ) has a 5/8" diameter clutch cross shaft, the 8"
late TD/TF bell housing has a 3/4" clutch cross shaft.
Bob
----------
> From: TATERRY@aol.com
> To: rddell@mindspring.com; mg-t@autox.team.net
> Subject: Re: TD/TF transmission
> Date: Monday, September 06, 1999 5:43 PM
>
> In a message dated 9/6/99 12:58:57 PM Pacific Daylight Time,
> rddell@mindspring.com writes:
>
> << Am I safe in assuming that the TD transmission is interchangeable with
the
> TF (1250 ) transmission?
> >>
>
> Gearbox the same but watch out for Bell housings...there is some
difference
> there with the two different clutch arrangements.
> Terry
|