Lew Palmer wrote:
Don,
The radiator support is a fairly simple sheet metal affair. It would be
pretty easy to bend one up out of 16 or 18 ga. Steel. I'll send you a
pattern if you require.
On the dipstick: If you find one, or parts of one, I need the little collar
that bolts to the sump. Mine has a crack all the way through.
Cheers,
Lew Palmer
-----Original Message-----
From: owner-mg-mmm@Autox.Team.Net [mailto:owner-mg-mmm@Autox.Team.Net] On
Behalf Of DB35PA@aol.com
Sent: Tuesday, October 19, 2004 7:19 AM
To: mg-mmm@Autox.Team.Net
Subject: PA parts needed
MMM experts,
Anyone have a spare PA oil dip stick and/or top radiator support bracket
(goes between Rad. cross brace and engine block)?
I'm making my own spark plug harness with period (woven cloth) wire from
British Wiring. Can I use same wire for coil ... or does it need to be a
larger
diameter?
Thanks,
Don B.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
All
I have made a dip strick using a valve cover not, which are available.
Jerry
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|