Pip,
I assume by the dimensions you quote you are wanting to use the Teflon as an
interlayer between spring leaves. Therefore, you want a thin sheet of
Teflon.
I find the many plastics companies in the US have it or can get it. You
might try such companies in your area. I also did a quick search on the
Internet for Teflon sheet in Australia. The most promising one I came up
with is: http://www.dotmar.com.au/index.htm
I hope this helps.
BTW, if you know of a source for spring steel that is 1.25 inches in width
(suitable for making new Triple-M spring leaves), let me know. None of the
spring companies here seem to have anything that narrow.
Cheers,
Lew Palmer
-----Original Message-----
From: owner-mg-mmm@autox.team.net [mailto:owner-mg-mmm@autox.team.net] On
Behalf Of Pip Bucknell
Sent: Monday, August 23, 2004 5:00 PM
To: MMM List UK
Subject: Teflon
I see various comments about Teflon seals.
This may assist me in my search for sheets of Teflon that I can cut strips
1.25" wide from.
Can any one put me in touch with a supplier of Teflon sheets, please.
Many thanks
Pip
AUSTRALIA
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|