Mayf,
Re-read my previous post and it dawned on me (duh!) that the inside diameter
of the vinyl tubing would not be consistant enough to get an accurate
reading.B (double duh!)
Put a plug in the bottom of each tube, starting out with the tube(s) empty.B
After each test open the petcock(s) and drain the gasolineB into a graduated
beaker to measure the amount of gasoline dispensed by each injector.
With this method, possibly just one catch-tube could be used.B It would be
slower, but probably just as accurate.B B A length of white PVC tubing could
also be used as transparancy of the tube would no longer be an issue using
this measurement method.
JGMagoo
_______________________________________________
Land-speed@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|