land-speed
[Top] [All Lists]

Re: Rear suspension

To: Nafzger <nafzger@vtc.net>, Keith Turk <kturk@ala.net>,
Subject: Re: Rear suspension
From: wspotter <wester6935@home.com>
Date: Tue, 23 Oct 2001 06:32:54 -0700
Howard,

It's been pretty well proved (ask George Fields) that additional weight
helps at Bonneville.  Without a suspension it makes loading weight less
intrusive in the handling.  That might be one of the larger factors in
deciding between a suspension or solid rear.

Wes


on 10/22/01 7:01 PM, Nafzger at nafzger@vtc.net wrote:

> Keith,
> God knows I'm no expert on this and I have spent a lot of time anguishing
> over this problem on the two liners I have built.
> I made them both with rigid suspension for three basic reasons.
> 1. Less complex and therefore probably more reliable.
> 2. Lighter and cheaper.
> 3. I can't figure out how to make a suspension that will respond to a 3 foot
> wide dip in the salt.
> Keep me honest on this guys. 60 MPH =88 ft/sec. therefore 240MPH =
> 352ft/sec. Therefore 1/100 of a second = 3.52ft.
> No suspension I am aware of will even begin to move in that time period. It
> will skip right over the depression anyway so I just did not mess with it.
> If I'm screwed up in my logic, let me know and I'll admit liners may be
> different in some ways but we have been very successful with rigid cars.
> P.S. The engine builder and I have both agreed to not go up there and
> embarrass ourselves anymore. Way too many engine problems.
> Howard
> 
> 
> ----- Original Message -----
> From: "Keith Turk" <kturk@ala.net>
> To: <land-speed@autox.team.net>
> Sent: Monday, October 22, 2001 4:28 AM
> Subject: Rear suspension
> 
> 
>> Okay along the lines of the Trans mounting system....   I wanna do the
> rear
>> suspension issues....
>> 
>> My thoughts are that a fancy rear suspension to make the car leave the
> line
>> is a Moot point at Bonneville... ( may help you at Maxton or El Mirage )
> but
>> once the car is through the gears it's settled down and the only real
>> advantage of a suspension at all is to maintain the contact patch with the
>> ground....over minor bumps...
>> 
>> Joe Timney and I have beat this up at length and I have several idea's on
>> the correct course of action for me....  But I'm curious to hear others
>> thoughts on what they run and WHY?....
>> 
>> In other words... what are your theory's..
>> 
>> Keith ( Mayf.... what you doing Hiding out... I love your questions...
>> always pointed .... which may not be pleasing to all ... however they are
>> always honest and well thought out )

///
///  land-speed@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe land-speed
///
///  or go to  http://www.team.net/cgi-bin/majorcool
///
///


<Prev in Thread] Current Thread [Next in Thread>