Jim
We use a dry type hydraulic coupler on the roll bar cutter system. They have
a check valve built in and screw together. They do not leak when uncoupled.
I believe you can get them from Nelson - Dunn in L.A. or Dearing engineering
in Long Beach. They have AN fittings in the hose end. All you need is the
size In your case a -4 should do it.
Glen
----- Original Message -----
From: "Jim Dincau" <jdincau@qnet.com>
To: "land speed list" <land-speed@autox.team.net>
Sent: Monday, May 28, 2001 10:12 PM
Subject: Dry break couplings
> Hi all,
> Has anyone out there used a dry break coupling on a hydraulic system,
> specifically a hydraulic clutch? If so, did it work? Were you able to
> eliminate having to bleed the system after a clutch/engine change?
> Jim in Palmdale
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
///
|