| To: | john robinson <john@engr.wisc.edu> |
|---|---|
| Subject: | Re: Valve Clearances |
| From: | Dave Dahlgren <ddahlgren@snet.net> |
| Date: | Fri, 19 Jan 2001 12:54:32 -0500 |
clay the pistons for a .006 valve lash change.. geez i thought I worked on stuff that was at the edge... Dave Dahlgren john robinson wrote: > > Howdy, > I'm following my cam guys recommendations (CamCraft one of > my sponsors!) , stock clearance for the Dodge Colt 1.6 liter engine was > .010, .012,and the cam guy says .004 and .006 in,ex. although he did say to > clay the piston/valve clearance before running the engine with this clearance. |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Monocycle news, Ed Van Scoy |
|---|---|
| Next by Date: | Re: pictures, Jonathan Amo |
| Previous by Thread: | Re: Valve Clearances, john robinson |
| Next by Thread: | Re: Valve Clearances, Dave Dahlgren |
| Indexes: | [Date] [Thread] [Top] [All Lists] |