You lost me Chris. Is it your opinion that is straight bogus advice and I
need pay no attention?
Thanks,
Dave Haller #93
----- Original Message -----
From: Chris R Harris <yesford@clear.net.nz>
To: David Haller <dhaller@techline.com>; <ARDUNDOUG@aol.com>;
<land-speed@autox.team.net>
Sent: Saturday, March 18, 2000 3:30 PM
Subject: Re: Cam Doctor problems
> Dave,
> Whoever gave you that tip, consider them a friend, or advice no
> more.
>
> Chris Harris. NZ.
>
> ----------
> > From: David Haller <dhaller@techline.com>
> > To: ARDUNDOUG@aol.com; land-speed@autox.team.net
> > Subject: Re: Cam Doctor problems
> > Date: Sunday, March 19, 2000 9:25 AM
> >
> > List,
> > Working on the car this last Thursday evening the discussion came up on
> the
> > need for a harmonic balancer on my small block. I have one of those
> > expensive ones on it now and was told I do not need to have one on the
> > engine and to run without it. It was claimed the balancer is robbing me
> of
> > horsepower unnecessarily, that the engine was already balanced besides
> real
> > run time was short so the need for one was not there. What is your
> > experience and opinions out there, I know you have the right ones,
> > Dave Haller #93 C/GAlt
> > ----- Original Message -----
> > From: <ARDUNDOUG@aol.com>
> > To: <land-speed@autox.team.net>
> > Sent: Tuesday, February 29, 2000 7:23 AM
> > Subject: Re: Cam Doctor problems
> >
> >
> > > In a message dated 02/29/2000 3:17:23 AM Pacific Standard Time,
> > > dahlgren@uconect.net writes:
> > >
> > > << There is a product i am not sure if you are aware of called the Cam
> > > Doctor(I am not sure who makes this) and Cam Pro Plus made by Audie
> > > technology that does what you want to do it also will do all the
input
> > > for you. It is made for exactly what you want to do. basically you
put
> > > the cam in the fixture and hook the fixture input to a PC. then
rotate
> > > the cam and it will intup all the numbers for you andf has many other
> > > neat features.. it is a little spendy but it is the tool for the job.
> > > http://www.audietech.com/
> > > I have no idea of their pricing but you might get some ideas here..
> > > Dahlgren
> > > EMS
> > > >>
> > > Group,
> > > Speaking of Cam Doctor, I just spent a weekend at the San Diego
> Swap
> > Meet
> > > with Roy Creel, this years VP of SCTA. Seems that the guys at McGee
> Cams
> > had
> > > a Cam Doctor that was inoperative for some reason and worked a deal
> with
> > Roy
> > > whereby he could use the thing if he would get it fixed.
> > > Roy contacted the Cam Doctor Mfg. in Denver, made the
arrangements,
> > and
> > > shipped it to them. It came back, supposedly fixed, but was still
> > > inoperative. Several months of un-returned phone calls later, Roy was
> in
> > PHX
> > > for a "Banger" seminar, then drove to Denver last week and took the
> local
> > > Sheriff to the guys home to get a check from the wife.
> > > Those of you who know Roy are aware of what a "straight-up" and
> > > innovative guy he is, so, buyer beware...........Ardun Doug in CA
> > >
> >
>
|