--===============7549765463595662963==
--000000000000b8eee705fc49fb02
Content-Transfer-Encoding: quoted-printable
Yes the rears of my BN2 are done the same way and when I checked them they
were each within 1 oz.
Not so much the fronts which were out by more than 2 oz which was
attributable to an inconsistency in the cross section of that inner rib.
I tried machining it to correct this but it is extremely hard so I used a
grinder to remove material from the inside of the rib which has worked well
and is not visible when the drum and wheel are installed.
M
On Mon, May 22, 2023 at 11:26=E2=80=AFAM Bob Spidell <bspidell@comcast.net>=
wrote:
> Here's a shot of removed metal on one of my BN2's drums (cut at about 9
> o'clock). This was done so cleanly I've always assumed it was done at the
> 'factory.'
>
>
> On 5/19/2023 9:54 AM, Perry Small via Healeys wrote:
>
> Listers
> If you look at the drums you will see areas that were ground off to
> balance the drums.
> I have given away all my spare parts so I do not have a good example to
> photograph.
> Perry
>
>
> Sent from my iPhone
>
> On May 19, 2023, at 2:19 AM, josef-eckert--- via Healeys
> <healeys@autox.team.net> <healeys@autox.team.net> wrote:
>
> =EF=BB=BF
>
> Good question Bob! I doubt they have done it and the cars were running
> anyway.
>
> Thanks,
>
> Josef
>
>
>
>
>
>
>
> -----Original-Nachricht-----
>
> Betreff: Re: [Healeys] Brake Drum balance -- was Wire Wheel Balancer
>
> Datum: 2023-05-19T07:56:40+0200
>
> Von: "Robert Parker via Healeys" <healeys@autox.team.net>
> <healeys@autox.team.net>
>
> An: "Michael Salter" <michaelsalter@gmail.com> <michaelsalter@gmail.com>
>
>
>
>
>
>
> Has anyone bothered to check whether the factory ever balanced the drums
> or even worried about it? It=E2=80=99s not that I don=E2=80=99t care, it=
=E2=80=99s just I=E2=80=99d like to
> know if anyone has heard of that happening at the factory. Bob, 61BT7.
>
> Sent from my iPhone
>
> On May 17, 2023, at 8:32 PM, Michael Salter via Healeys
> <healeys@autox.team.net> <healeys@autox.team.net> wrote:
>
> With all this noise about balancing brake drums I thought I had better
> take a look at the ones on my BN2.
> I'm in the process if machining them back to balance now.
> Bit of a task on my 12" lathe but it's happening.
>
> On Wed., May 17, 2023, 8:46 p.m. Michael MacLean via Healeys, <
> healeys@autox.team.net> wrote:
>
>> Don't grind it. Have it machined off.
>> Mike MacLean
>>
>> On Wed, May 17, 2023, 6:58 AM Richard Kahn <tahoehealey@hotmail.com>
>> wrote:
>>
>>> Hendrix welded more material to my drums as needed and it seems to have
>>> worked fine. I would not like grinding off material as it might affect =
the
>>> integrity of the drum by making it thinner, effecting the heat distribu=
tion
>>> and strength. Just some rambling from someone who doesn't know what he=
is
>>> talking about.
>>>
>>>
>>> ------------------------------
>>> *From:* Healeys <healeys-bounces@autox.team.net> on behalf of
>>> alfuller194@gmail.com <alfuller194@gmail.com>
>>> *Sent:* Wednesday, May 17, 2023 12:23 AM
>>> *To:* 'Michael MacLean' <springer.mike51@gmail.com>
>>> *Cc:* 'Healey List' <healeys@autox.team.net>
>>> *Subject:* Re: [Healeys] Brake Drum balance -- was Wire Wheel Balancer
>>>
>>>
>>> Mike =E2=80=93 I would think that would be the likely explanation for h=
aving
>>> sections of the drum rim machined off.
>>>
>>>
>>>
>>> ----------------
>>>
>>> All the best,
>>>
>>>
>>>
>>> Al Fuller
>>>
>>>
>>>
>>> *From:* Michael MacLean <springer.mike51@gmail.com>
>>> *Sent:* Tuesday, May 16, 2023 2:47 PM
>>> *To:* alfuller194@gmail.com
>>> *Subject:* Re: [Healeys] Brake Drum balance -- was Wire Wheel Balancer
>>>
>>>
>>>
>>> Al, list,
>>>
>>> The drums for my BN2 has sections of the raised rim machined off.
>>> Does this mean my drums were balanced in the past?
>>>
>>> Mike MacLean
>>>
>>>
>>>
>>> On Tue, May 16, 2023, 2:30 PM <alfuller194@gmail.com> wrote:
>>>
>>> Bob: If you are wondering about brake drum balancing methods, you may
>>> be interested in the two methods used on my Healeys.
>>>
>>>
>>>
>>> One shop trimmed off the fins as needed to balance the drums, one
>>> needing more trimming than the other =E2=80=93 but they both came out w=
ell.
>>>
>>>
>>>
>>> A different shop welded rod material onto my current BJ-8=E2=80=99s dru=
ms to
>>> balance them. I think these drums were more out of balance than on prio=
r
>>> cars. They were careful to call me ahead of the operation to ask how mu=
ch
>>> clearance I had between the wheel and drum, and I was able to take them=
a
>>> wheel and hub so they could see how it all fit together. The results a=
re
>>> just fine, also.
>>>
>>> ----------------
>>>
>>> All the best,
>>>
>>>
>>>
>>> Al Fuller
>>>
>>>
>>>
>>> *From:* Healeys <healeys-bounces@autox.team.net> *On Behalf Of *Bob
>>> Haskell via Healeys
>>> *Sent:* Monday, May 15, 2023 2:36 PM
>>> *To:* Harold Manifold <manifold@telus.net>; Healey List <
>>> healeys@autox.team.net>
>>> *Subject:* Re: [Healeys] Wire Wheel Balancer
>>>
>>>
>>>
>>> Harold,
>>>
>>> How did you balance the drums - add or remove material? Care to provide
>>> any details?
>>>
>>> Bob Haskell
>>>
>>> Austin-Healey 3000 roadster registrar
>>>
>>> On 5/15/23 11:32, Harold Manifold wrote:
>>>
>>> Another consideration for balancing the rear tires is the brake drums. =
I
>>> have the original BMC brake drums and was surprised at how out of balan=
ce
>>> they were. I static balanced the brake drums to go with the
>>> separately balanced wheels and tires. No vibrations, shimmies or skuttl=
e
>>> shakes so far.
>>>
>>>
>>>
>>> Harold
>>>
>>>
>>>
>>> On Mon, May 15, 2023 at 12:34=E2=80=AFAM <greylinn@ozemail.com.au> wrot=
e:
>>>
>>> Here in Brisbane there=E2=80=99s at least one place (near me) that does=
on-car
>>> balancing. The wheels on my 100 don=E2=80=99t have a central hole, so c=
an=E2=80=99t be
>>> balanced on a regular machine. That said, the last set of Khumo Ecowing
>>> ES31s I bought are fine with no balancing!
>>>
>>>
>>>
>>> Peter Linn
>>>
>>> Brisbane
>>>
>>> BN1 Holden V6
>>>
>>> MG TC special
>>>
>>>
>>>
>>> *From:* Healeys <healeys-bounces@autox.team.net> *On Behalf Of *m.g.sha=
rp---
>>> via Healeys
>>> *Sent:* Monday, May 15, 2023 1:07 PM
>>> *To:* 'Harold Manifold' <manifold@telus.net>; 'HealeyRick' <
>>> healeyrik@gmail.com>
>>> *Cc:* 'Healeys' <healeys@autox.team.net>
>>> *Subject:* Re: [Healeys] Wire Wheel Balancer
>>>
>>>
>>>
>>> I made up my own adaptor using a used hub and knock-off (spinner). I
>>> had a machinist mount the hub on the lathe and ensure that it was true =
on
>>> the inside edges (where the bearings fit) and had him put a slight cham=
fer
>>> on the edges to provide better registration for the standard cones on a
>>> modern balancer. Then we machined the centre out of the spinner so th=
at
>>> when the wheel is mounted on the hub and the spinner is tightened, the
>>> outer cone on the balancer fits through it and registers on the hub. T=
hat
>>> part is a little tricky as if you machine the hole too big, the spinner
>>> will end up in two pieces =E2=80=93 measure carefully! Hub and spinner=
was $25 at
>>> a swap meet and machining was $50. I believe this adaptor will work on=
any
>>> post-war wire wheels except the Jags, which had different hubs. Worked=
a
>>> treat on my TC wheels. Healey is running vibration-free- so leaving it
>>> alone for now.
>>>
>>>
>>>
>>> I too liked on-wheel balancing and in my simple thinking it balanced th=
e
>>> drum or disk at the same time =E2=80=93 as long as you remembered to ma=
rk the
>>> position of the wheels when you took them off and did not rotate them (=
to a
>>> different position on the car)! That is likely one reason they are no=
t
>>> used anymore, because if your drums were out of balance and you added
>>> weights to the wheel that balanced them out, then every time you remove=
d
>>> the wheel, you=E2=80=99d loose the balance, unless it went back in exac=
tly the same
>>> position. Anyhow it=E2=80=99s a moot point as I have not seen an on-w=
heel
>>> balancer for decades. I imagine that disks run very true anyhow, but =
when
>>> I balanced the drums on the TC they were significantly off. I hear
>>> balancing Healey drums brings good results, but never felt the need as =
my
>>> BT7 has always run pretty smooth. If anyone in Ontario (Canada) wants
>>> drums balanced, Garland and Sons in Scarborough did great work for me.
>>>
>>>
>>>
>>> Mirek
>>>
>>>
>>>
>>> *From:* Healeys <healeys-bounces@autox.team.net> *On Behalf Of *Harold
>>> Manifold
>>> *Sent:* Thursday, May 11, 2023 11:35 AM
>>> *To:* HealeyRick <healeyrik@gmail.com>
>>> *Cc:* Healeys <healeys@autox.team.net>
>>> *Subject:* Re: [Healeys] Wire Wheel Balancer
>>>
>>>
>>>
>>> It looks like the kit is designed to follow the Dunlop/MWS
>>> recommendations for balancing. See attached. It should be a good piece =
of
>>> kit.
>>>
>>>
>>>
>>> Harold
>>>
>>>
>>>
>>> On Thu, May 11, 2023 at 8:28=E2=80=AFAM HealeyRick via Healeys <
>>> healeys@autox.team.net> wrote:
>>>
>>> AH Spares just sent out this email about a wire wheel balancer kit to
>>> mount the wheels on a modern balancing machine. What are your thoughts=
?
>>> https://www.ahspares.co.uk/austin-healey/big-healey/wheels/wire-wheel-b=
alancing-kit.aspx?utm_medium=3Demail-1st&utm_source=3Dnewsletter&utm_medium=
=3Demail
>>>
>>>
>>>
>>> Rick Neville aka "HealeyRick"
>>>
>>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation $12.75
>>>
>>> Archive: http://www.team.net/pipermail/healeys
>>> http://autox.team.net/archive/healeys
>>>
>>> Healeys@autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>>
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/healeys/manifold@telus.net
>>>
>>>
>>>
>>> _______________________________________________
>>>
>>> Support Team.Net http://www.team.net/donate.html
>>>
>>> Suggested annual donation $12.75
>>>
>>>
>>>
>>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/ar=
chive/healeys
>>>
>>>
>>>
>>> Healeys@autox.team.net
>>>
>>> http://autox.team.net/mailman/listinfo/healeys
>>>
>>>
>>>
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchas=
kell@earthlink.net
>>>
>>>
>>>
>>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation $12.75
>>>
>>> Archive: http://www.team.net/pipermail/healeys
>>> http://autox.team.net/archive/healeys
>>>
>>> Healeys@autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>>
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/healeys/springer.mike51@gmail.com
>>>
>>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive/healeys
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>>
>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/rd_parker@juno.com
>
> =EF=BB=BF_______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healeyguy@aol.com
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/arch=
ive/healeys
> Healeys@autox.team.nethttp://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidel=
l@comcast.net
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
--000000000000b8eee705fc49fb02
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr"><div class=3D"gmail_default" style=3D"font-family:arial,sa=
ns-serif;font-size:small">Yes the rears of my BN2 are done the same way and=
when I checked them they were each within 1 oz.</div><div class=3D"gmail_d=
efault" style=3D"font-family:arial,sans-serif;font-size:small">Not so much =
the fronts which were out by more than 2 oz which was attributable to an in=
consistency in the cross section of that inner rib. <br></div><div class=3D=
"gmail_default" style=3D"font-family:arial,sans-serif;font-size:small">I tr=
ied machining it to correct this but it is extremely hard so I used a grind=
er to remove material from the inside of the rib which has worked well and =
is not visible when the drum and wheel are installed.</div><div class=3D"gm=
ail_default" style=3D"font-family:arial,sans-serif;font-size:small"><br></d=
iv><div class=3D"gmail_default" style=3D"font-family:arial,sans-serif;font-=
size:small">M<br></div></div><br><div class=3D"gmail_quote"><div dir=3D"ltr=
" class=3D"gmail_attr">On Mon, May 22, 2023 at 11:26=E2=80=AFAM Bob Spidell=
<<a href=3D"mailto:bspidell@comcast.net";>bspidell@comcast.net</a>> w=
rote:<br></div><blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0p=
x 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
=20
=20
=20
<div>
Here's a shot of removed metal on one of my BN2's drums (cut at
about 9 o'clock). This was done so cleanly I've always assumed =
it
was done at the 'factory.'<br>
<br>
<br>
<div>On 5/19/2023 9:54 AM, Perry Small via
Healeys wrote:<br>
</div>
<blockquote type=3D"cite">
=20
Listers=C2=A0
<div>If you look at the drums you will see areas that were ground
off to balance the drums.=C2=A0
<div>I have given away all my spare parts so I do not have a
good example to photograph.=C2=A0</div>
<div>Perry</div>
<div><br>
<br>
<div dir=3D"ltr">Sent from my iPhone</div>
<div dir=3D"ltr"><br>
<blockquote type=3D"cite">On May 19, 2023, at 2:19 AM,
josef-eckert--- via Healeys <a href=3D"mailto:healeys@autox.t=
eam.net" target=3D"_blank"><healeys@autox.team.net></a>
wrote:<br>
<br>
</blockquote>
</div>
<blockquote type=3D"cite">
<div dir=3D"ltr">=EF=BB=BF
=20
=20
<p style=3D"margin:0px"><span style=3D"font-family:arial,helv=
etica,sans-serif;font-size:10pt;color:rgb(0,0,0);text-decoration:none">Good
question Bob! I doubt they have done it and the cars
were running anyway.<br>
</span></p>
<p style=3D"margin:0px"><span style=3D"font-family:arial,helv=
etica,sans-serif;font-size:10pt;color:rgb(0,0,0);text-decoration:none">Than=
ks,</span></p>
<p style=3D"margin:0px"><span style=3D"font-family:arial,helv=
etica,sans-serif;font-size:10pt;color:rgb(0,0,0);text-decoration:none">Jose=
f</span></p>
<p style=3D"margin:0px"><span style=3D"font-family:arial,helv=
etica,sans-serif;font-size:10pt;color:rgb(0,0,0);text-decoration:none">=C2=
=A0</span></p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">-----Original-Nachricht-----</p>
<p style=3D"margin:0px">Betreff: Re: [Healeys] Brake Drum
balance -- was Wire Wheel Balancer</p>
<p style=3D"margin:0px">Datum: 2023-05-19T07:56:40+0200</p>
<p style=3D"margin:0px">Von: "Robert Parker via Healeys&=
quot;
<a href=3D"mailto:healeys@autox.team.net"; target=3D"_blank"=
><healeys@autox.team.net></a></p>
<p style=3D"margin:0px">An: "Michael Salter"
<a href=3D"mailto:michaelsalter@gmail.com"; target=3D"_blank=
"><michaelsalter@gmail.com></a></p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">=C2=A0</p>
<div style=3D"color:rgb(0,0,0);font:12px Arial,Helvetica,sans=
-serif">Has anyone bothered to
check whether the factory ever balanced the drums or
even worried about it? It=E2=80=99s not that I don=E2=80=99=
t care, it=E2=80=99s
just I=E2=80=99d like to know if anyone has heard of that
happening at the factory. Bob, 61BT7.<br>
<br>
<div dir=3D"ltr">Sent from my iPhone</div>
<div dir=3D"ltr"><br>
<blockquote>On May 17, 2023, at 8:32 PM, Michael
Salter via Healeys <a href=3D"mailto:healeys@autox.team=
.net" target=3D"_blank"><healeys@autox.team.net></a>
wrote:<br>
<br>
</blockquote>
</div>
<blockquote>
<div dir=3D"ltr">
<div dir=3D"auto">With all this noise about balancing
brake drums I thought I had better take a look at
the ones on my BN2.=C2=A0
<div dir=3D"auto">I'm in the process if machining
them back to=C2=A0 balance now.=C2=A0</div>
<div dir=3D"auto">Bit of a task on my 12" lathe =
but
it's happening.</div>
</div>
<br>
<div class=3D"gmail_quote">
<div class=3D"gmail_attr" dir=3D"ltr">On Wed., May 17=
,
2023, 8:46 p.m. Michael MacLean via Healeys,
<<a href=3D"mailto:healeys@autox.team.net"; targe=
t=3D"_blank">healeys@autox.team.net</a>>
wrote:</div>
<blockquote class=3D"gmail_quote" style=3D"margin:0px=
0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir=3D"auto">Don't grind it. Have it machi=
ned
off.
<div dir=3D"auto">Mike MacLean</div>
</div>
<br>
<div class=3D"gmail_quote">
<div class=3D"gmail_attr" dir=3D"ltr">On Wed, May
17, 2023, 6:58 AM Richard Kahn <<a href=3D"m=
ailto:tahoehealey@hotmail.com" rel=3D"noreferrer" target=3D"_blank">tahoehe=
aley@hotmail.com</a>>
wrote:</div>
<blockquote class=3D"gmail_quote" style=3D"margin=
:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"=
>
<div dir=3D"ltr">
<div style=3D"font-family:Calibri,Helvetica,s=
ans-serif;font-size:12pt;color:rgb(0,0,0)">Hendrix welded
more material to my drums as needed and
it seems to have worked fine. I would
not like grinding off material as it
might affect the integrity of the drum
by making it thinner, effecting the heat
distribution and strength.=C2=A0 Just some
rambling from someone who doesn't know
what he is talking about.</div>
<div>=C2=A0</div>
<div style=3D"font-family:Calibri,Helvetica,s=
ans-serif;font-size:12pt;color:rgb(0,0,0)">=C2=A0</div>
<hr style=3D"display:inline-block;width:98%">
<div dir=3D"ltr"><span style=3D"font-size:11p=
t;color:rgb(0,0,0);font-family:Calibri,sans-serif"><strong>From:</strong>
Healeys <<a href=3D"mailto:healeys-bou=
nces@autox.team.net" rel=3D"noreferrer noreferrer" target=3D"_blank">healey=
s-bounces@autox.team.net</a>>
on behalf of <a href=3D"mailto:alfuller19=
4@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">alfuller194@gm=
ail.com</a>
<<a href=3D"mailto:alfuller194@gmail.c=
om" rel=3D"noreferrer noreferrer" target=3D"_blank">alfuller194@gmail.com</=
a>><br>
<strong>Sent:</strong> Wednesday, May
17, 2023 12:23 AM<br>
<strong>To:</strong> 'Michael MacLean=
'
<<a href=3D"mailto:springer.mike51@gma=
il.com" rel=3D"noreferrer noreferrer" target=3D"_blank">springer.mike51@gma=
il.com</a>><br>
<strong>Cc:</strong> 'Healey List'=
;
<<a href=3D"mailto:healeys@autox.team.=
net" rel=3D"noreferrer noreferrer" target=3D"_blank">healeys@autox.team.net=
</a>><br>
<strong>Subject:</strong> Re:
[Healeys] Brake Drum balance -- was
Wire Wheel Balancer</span>
<div>=C2=A0</div>
</div>
<div style=3D"overflow-wrap: break-word;" lan=
g=3D"EN-US">
<div>
<p style=3D"margin:0px;font-size:11pt;fon=
t-family:Calibri,sans-serif">Mike =E2=80=93 I would think
that would be the likely explanation
for having sections of the drum rim
machined off.</p>
<p style=3D"margin:0px;font-size:11pt;fon=
t-family:Calibri,sans-serif">=C2=A0</p>
<p style=3D"margin:0px;font-size:11pt;fon=
t-family:Calibri,sans-serif">----------------</p>
<p style=3D"margin:0px;font-size:11pt;fon=
t-family:Calibri,sans-serif">All the best,</p>
<p style=3D"margin:0px;font-size:11pt;fon=
t-family:Calibri,sans-serif">=C2=A0</p>
<p style=3D"margin:0px;font-size:11pt;fon=
t-family:Calibri,sans-serif">Al Fuller</p>
<p style=3D"margin:0px;font-size:11pt;fon=
t-family:Calibri,sans-serif">=C2=A0</p>
<div style=3D"border-color:rgb(225,225,22=
5) currentcolor currentcolor;border-style:solid none none;border-width:1pt =
medium medium;padding:3pt 0in 0in">
<p style=3D"margin:0px;font-size:11pt;f=
ont-family:Calibri,sans-serif"><strong>From:</strong>
Michael MacLean <<a href=3D"mailto=
:springer.mike51@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank"=
>springer.mike51@gmail.com</a>>
<br>
<strong>Sent:</strong> Tuesday,
May 16, 2023 2:47 PM<br>
<strong>To:</strong> <a href=3D"mailt=
o:alfuller194@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">al=
fuller194@gmail.com</a><br>
<strong>Subject:</strong> Re:
[Healeys] Brake Drum balance --
was Wire Wheel Balancer</p>
</div>
<p style=3D"margin:0px;font-size:11pt;fon=
t-family:Calibri,sans-serif">=C2=A0</p>
<div>
<p style=3D"margin:0px;font-size:11pt;f=
ont-family:Calibri,sans-serif">Al, list,=C2=A0</p>
<div>
<p style=3D"margin:0px;font-size:11pt=
;font-family:Calibri,sans-serif">=C2=A0 =C2=A0 =C2=A0The drums for
my BN2 has sections of the
raised rim machined off. Does
this mean my drums were balanced
in the past?</p>
</div>
<div>
<p style=3D"margin:0px;font-size:11pt=
;font-family:Calibri,sans-serif">Mike MacLean</p>
</div>
</div>
<p style=3D"margin:0px;font-size:11pt;fon=
t-family:Calibri,sans-serif">=C2=A0</p>
<div>
<div>
<p style=3D"margin:0px;font-size:11pt=
;font-family:Calibri,sans-serif">On Tue, May 16,
2023, 2:30 PM <<a href=3D"mailto=
:alfuller194@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">alf=
uller194@gmail.com</a>>
wrote:</p>
</div>
<blockquote style=3D"border-color:curre=
ntcolor currentcolor currentcolor rgb(204,204,204);border-style:none none n=
one solid;border-width:medium medium medium 1pt;padding:0in 0in 0in 6pt;mar=
gin-left:4.8pt;margin-right:0in">
<div>
<div>
<p style=3D"margin:0px;font-size:=
11pt;font-family:Calibri,sans-serif">Bob:=C2=A0 If you
are wondering about brake
drum balancing methods, you
may be interested in the two
methods used on my Healeys.</p>
<p style=3D"margin:0px;font-size:=
11pt;font-family:Calibri,sans-serif">=C2=A0</p>
<p style=3D"margin:0px;font-size:=
11pt;font-family:Calibri,sans-serif">One shop
trimmed off the fins as
needed to balance the drums,
one needing more trimming
than the other =E2=80=93 but th=
ey
both came out well.</p>
<p style=3D"margin:0px;font-size:=
11pt;font-family:Calibri,sans-serif">=C2=A0</p>
<p style=3D"margin:0px;font-size:=
11pt;font-family:Calibri,sans-serif">A different
shop welded rod material
onto my current BJ-8=E2=80=99s =
drums
to balance them. I think
these drums were more out of
balance than on prior cars.
They were careful to call me
ahead of the operation to
ask how much clearance I had
between the wheel and drum,
and I was able to take them
a wheel and hub so they
could see how it all fit
together.=C2=A0 The results are
just fine, also.</p>
<div>
<p style=3D"margin:0px;font-siz=
e:11pt;font-family:Calibri,sans-serif">----------------</p>
<p style=3D"margin:0px;font-siz=
e:11pt;font-family:Calibri,sans-serif">All the best,</p>
<p style=3D"margin:0px;font-siz=
e:11pt;font-family:Calibri,sans-serif">=C2=A0</p>
<p style=3D"margin:0px;font-siz=
e:11pt;font-family:Calibri,sans-serif">Al Fuller</p>
</div>
<p style=3D"margin:0px;font-size:=
11pt;font-family:Calibri,sans-serif">=C2=A0</p>
<div>
<div style=3D"border-color:rgb(=
225,225,225) currentcolor currentcolor;border-style:solid none none;border-=
width:1pt medium medium;padding:3pt 0in 0in">
<p style=3D"margin:0px;font-s=
ize:11pt;font-family:Calibri,sans-serif"><strong>From:</strong>
Healeys <<a href=3D"mail=
to:healeys-bounces@autox.team.net" rel=3D"noreferrer
noreferrer" target=3D"_bl=
ank">healeys-bounces@autox.team.net</a>> <strong>On
Behalf Of </strong>Bob
Haskell via Healeys<br>
<strong>Sent:</strong>
Monday, May 15, 2023
2:36 PM<br>
<strong>To:</strong>
Harold Manifold <<a href=
=3D"mailto:manifold@telus.net"; rel=3D"noreferrer
noreferrer" target=3D"_bl=
ank">manifold@telus.net</a>>; Healey List
<<a href=3D"mailto:heale=
ys@autox.team.net" rel=3D"noreferrer
noreferrer" target=3D"_bl=
ank">healeys@autox.team.net</a>><br>
<strong>Subject:</strong>
Re: [Healeys] Wire Wheel
Balancer</p>
</div>
</div>
<p style=3D"margin:0px;font-size:=
11pt;font-family:Calibri,sans-serif">=C2=A0</p>
<p style=3D"margin:0px">Harold,</=
p>
<p style=3D"margin:0px">How
did you balance the drums -
add or remove material? Care
to provide any details?</p>
<pre>Bob Haskell</pre>
<pre>Austin-Healey 3000 roadster =
registrar</pre>
<div>
<p style=3D"margin:0px;font-siz=
e:11pt;font-family:Calibri,sans-serif">On 5/15/23
11:32, Harold Manifold
wrote:</p>
</div>
<blockquote style=3D"margin-top:5=
pt;margin-bottom:5pt">
<div>
<p style=3D"margin:0px;font-s=
ize:11pt;font-family:Calibri,sans-serif">Another
consideration for
balancing the rear tires
is the brake drums. I
have the original BMC
brake drums and was
surprised at how out of
balance they were. I
static balanced the
brake drums to go with
the separately=C2=A0balance=
d
wheels and tires. No
vibrations, shimmies or
skuttle shakes so far.</p>
<div>
<p style=3D"margin:0px;font=
-size:11pt;font-family:Calibri,sans-serif">=C2=A0</p>
</div>
<div>
<p style=3D"margin:0px;font=
-size:11pt;font-family:Calibri,sans-serif">Harold</p>
</div>
</div>
<p style=3D"margin:0px;font-siz=
e:11pt;font-family:Calibri,sans-serif">=C2=A0</p>
<div>
<div>
<p style=3D"margin:0px;font=
-size:11pt;font-family:Calibri,sans-serif">On Mon,
May 15, 2023 at
12:34=E2=80=AFAM <<a h=
ref=3D"mailto:greylinn@ozemail.com.au"; rel=3D"noreferrer
noreferrer" target=3D"_=
blank">greylinn@ozemail.com.au</a>> wrote:</p>
</div>
<blockquote style=3D"border-c=
olor:currentcolor currentcolor currentcolor rgb(204,204,204);border-style:n=
one none none solid;border-width:medium medium medium 1pt;padding:0in 0in 0=
in 6pt;margin:5pt 0in 5pt 4.8pt">
<div>
<div>
<div>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-AU">Here
in Brisbane
there=E2=80=99s a=
t
least one
place (near
me) that does
on-car
balancing. The
wheels on my
100 don=E2=80=99t=
have
a central
hole, so can=E2=
=80=99t
be balanced on
a regular
machine. That
said, the last
set of Khumo
Ecowing ES31s
I bought are
fine with no
balancing!</span>=
</p>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-AU">=C2=
=A0</span></p>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-AU">Peter
Linn</span></p>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-AU">Brisb=
ane</span></p>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-AU">BN1
Holden V6</span><=
/p>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-AU">MG
TC special</span>=
</p>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-AU">=C2=
=A0</span></p>
<div>
<div style=3D"borde=
r-color:rgb(225,225,225) currentcolor currentcolor;border-style:solid none =
none;border-width:1pt medium medium;padding:3pt 0in 0in">
<p style=3D"margi=
n:0px;font-size:11pt;font-family:Calibri,sans-serif"><strong>From:</strong>
Healeys <<a hr=
ef=3D"mailto:healeys-bounces@autox.team.net"; rel=3D"noreferrer noreferrer" =
target=3D"_blank">healeys-bounces@autox.team.net</a>>
<strong>On
Behalf Of </stron=
g>m.g.sharp---
via Healeys<br>
<strong>Sent:</st=
rong>
Monday, May
15, 2023 1:07
PM<br>
<strong>To:</stro=
ng>
'Harold
Manifold' <=
;<a href=3D"mailto:manifold@telus.net"; rel=3D"noreferrer noreferrer" target=
=3D"_blank">manifold@telus.net</a>>; 'HealeyRick'
<<a href=3D"ma=
ilto:healeyrik@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">h=
ealeyrik@gmail.com</a>><br>
<strong>Cc:</stro=
ng>
'Healeys'=
<<a href=3D"mailto:healeys@autox.team.net"; rel=3D"noreferrer noreferrer=
" target=3D"_blank">healeys@autox.team.net</a>><br>
<strong>Subject:<=
/strong>
Re: [Healeys]
Wire Wheel
Balancer</p>
</div>
</div>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-AU">=C2=
=A0</span></p>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">I
made up my own
adaptor using
a used hub and
knock-off
(spinner).=C2=A0 =
I
had a
machinist
mount the hub
on the lathe
and ensure
that it was
true on the
inside edges
(where the
bearings fit)
and had him
put a slight
chamfer on the
edges to
provide better
registration
for the
standard cones
on a modern
balancer.=C2=A0
Then we
machined the
centre out of
the spinner
so=C2=A0 that whe=
n
the wheel is
mounted on the
hub and the
spinner is
tightened, the
outer cone on
the balancer
fits through
it and
registers on
the hub.=C2=A0 Th=
at
part is a
little tricky
as if you
machine the
hole too big,
the spinner
will end up in
two pieces =E2=80=
=93
measure
carefully!=C2=A0
Hub and
spinner was
$25 at a swap
meet and
machining was
$50.=C2=A0 I
believe this
adaptor will
work on any
post-war wire
wheels except
the Jags,
which had
different
hubs.=C2=A0 Worke=
d
a treat on my
TC wheels.=C2=A0
Healey is
running
vibration-free-
so leaving it
alone for now.</s=
pan></p>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">=C2=
=A0</span></p>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">I
too liked
on-wheel
balancing and
in my simple
thinking it
balanced the
drum or disk
at the same
time =E2=80=93 as=
long
as you
remembered to
mark the
position of
the wheels
when you took
them off and
did not rotate
them (to a
different
position on
the car)!=C2=A0
That is likely
one reason
=C2=A0they are no=
t
used anymore,
because if
your drums
were out of
balance and
you added
weights to the
wheel that
balanced them
out, then
every time you
removed the
wheel, you=E2=80=
=99d
loose the
balance,
unless it went
back in
exactly the
same position.
=C2=A0=C2=A0Anyho=
w it=E2=80=99s
a moot point
as I have not
seen an
on-wheel
balancer for
decades. =C2=A0=
=C2=A0I
imagine that
disks run very
true anyhow,
but when I
balanced the
drums on the
TC=C2=A0 they wer=
e
significantly
off.=C2=A0 I hear
balancing
Healey drums
brings good
results, but
never felt the
need as my BT7
has always run
pretty
smooth.=C2=A0 If
anyone in
Ontario
(Canada) wants
drums
balanced,
Garland and
Sons in
Scarborough
did great work
for me.</span></p=
>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">=C2=
=A0</span></p>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">Mirek=
</span></p>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">=C2=
=A0</span></p>
<div style=3D"border-=
color:rgb(225,225,225) currentcolor currentcolor;border-style:solid none no=
ne;border-width:1pt medium medium;padding:3pt 0in 0in">
<p style=3D"margin:=
0px;font-size:11pt;font-family:Calibri,sans-serif"><strong>From:</strong>
Healeys <<a hr=
ef=3D"mailto:healeys-bounces@autox.team.net"; rel=3D"noreferrer noreferrer" =
target=3D"_blank">healeys-bounces@autox.team.net</a>>
<strong>On
Behalf Of </stron=
g>Harold
Manifold<br>
<strong>Sent:</st=
rong>
Thursday, May
11, 2023 11:35
AM<br>
<strong>To:</stro=
ng>
HealeyRick
<<a href=3D"ma=
ilto:healeyrik@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">h=
ealeyrik@gmail.com</a>><br>
<strong>Cc:</stro=
ng>
Healeys <<a hr=
ef=3D"mailto:healeys@autox.team.net"; rel=3D"noreferrer noreferrer" target=
=3D"_blank">healeys@autox.team.net</a>><br>
<strong>Subject:<=
/strong>
Re: [Healeys]
Wire Wheel
Balancer</p>
</div>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">=C2=
=A0</span></p>
<div>
<p style=3D"margin:=
0px;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">It
looks like the
kit is
designed to
follow=C2=A0the
Dunlop/MWS
recommendations
for balancing.
See attached.
It should be a
good piece of
kit.</span></p>
<div>
<p style=3D"margi=
n:0px;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">=
=C2=A0</span></p>
</div>
<div>
<p style=3D"margi=
n:0px;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">H=
arold</span></p>
</div>
</div>
<p style=3D"margin:0p=
x;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">=C2=
=A0</span></p>
<div>
<div>
<p style=3D"margi=
n:0px;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">O=
n
Thu, May 11,
2023 at
8:28=E2=80=AFAM
HealeyRick via
Healeys <<a hr=
ef=3D"mailto:healeys@autox.team.net"; rel=3D"noreferrer noreferrer" target=
=3D"_blank">healeys@autox.team.net</a>> wrote:</span></p>
</div>
<blockquote style=
=3D"border-color:currentcolor currentcolor currentcolor rgb(204,204,204);bo=
rder-style:none none none solid;border-width:medium medium medium 1pt;paddi=
ng:0in 0in 0in 6pt;margin:5pt 0in 5pt 4.8pt">
<div>
<p style=3D"margi=
n:0px;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">A=
H
Spares just
sent out this
email about a
wire wheel
balancer kit
to mount the
wheels on a
modern
balancing
machine.=C2=A0 Wh=
at
are your
thoughts?=C2=A0=
=C2=A0<a href=3D"https://www.ahspares.co.uk/austin-healey/big-healey/wheels=
/wire-wheel-balancing-kit.aspx?utm_medium=3Demail-1st&utm_source=3Dnews=
letter&utm_medium=3Demail" rel=3D"noreferrer noreferrer" target=3D"_bla=
nk">https://www.ahspares.co.uk/austin-healey/big-healey/wheels/wire-wheel-b=
alancing-kit.aspx?utm_medium=3Demail-1st&utm_source=3Dnewsletter&ut=
m_medium=3Demail</a></span></p>
<div>
<p style=3D"margi=
n:0px;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">=
=C2=A0</span></p>
</div>
<div>
<p style=3D"margi=
n:0px;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">R=
ick
Neville aka
"HealeyRick&=
quot;</span></p>
</div>
</div>
<p style=3D"margi=
n:0px;font-size:11pt;font-family:Calibri,sans-serif"><span lang=3D"EN-CA">_=
______________________________________________<br>
Support
Team.Net <a href=
=3D"http://www.team.net/donate.html"; rel=3D"noreferrer noreferrer" target=
=3D"_blank">
Suggested
annual
donation=C2=A0
$12.75<br>
<br>
Archive: <a href=
=3D"http://www.team.net/pipermail/healeys"; rel=3D"noreferrer noreferrer" ta=
rget=3D"_blank">
http://www.team.net/pipermail/healeys</a> <a href=3D"http://autox.team.net/=
archive/healeys" rel=3D"noreferrer noreferrer" target=3D"_blank">
http://autox.team.net/archive/healeys</a><br>
<br>
<a href=3D"mailto=
:Healeys@autox.team.net" rel=3D"noreferrer noreferrer" target=3D"_blank">He=
aleys@autox.team.net</a><br>
<a href=3D"http:/=
/autox.team.net/mailman/listinfo/healeys" rel=3D"noreferrer noreferrer" tar=
get=3D"_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
s/manifold@telus.net" rel=3D"noreferrer noreferrer" target=3D"_blank">
http://autox.team.net/mailman/options/healeys/manifold@telus.net</a></span>=
</p>
</blockquote>
</div>
</div>
</div>
</div>
</blockquote>
</div>
<p style=3D"margin:0px;font-siz=
e:11pt;font-family:Calibri,sans-serif">=C2=A0</p>
<pre>__________________________=
_____________________</pre>
<pre>Support Team.Net <a href=
=3D"http://www.team.net/donate.html"; rel=3D"noreferrer noreferrer" target=
=3D"_blank">http://www.team.net/donate.html</a></pre>
<pre>Suggested annual donation=
=C2=A0 $12.75</pre>
<pre>=C2=A0</pre>
<pre>Archive: <a href=3D"http:/=
/www.team.net/pipermail/healeys" rel=3D"noreferrer noreferrer" target=3D"_b=
lank">http://www.team.net/pipermail/healeys</a> <a href=3D"http://autox.tea=
m.net/archive/healeys" rel=3D"noreferrer noreferrer" target=3D"_blank">http=
://autox.team.net/archive/healeys</a></pre>
<pre>=C2=A0</pre>
<pre><a href=3D"mailto:Healeys@=
autox.team.net" rel=3D"noreferrer noreferrer" target=3D"_blank">Healeys@aut=
ox.team.net</a></pre>
<pre><a href=3D"http://autox.te=
am.net/mailman/listinfo/healeys" rel=3D"noreferrer noreferrer" target=3D"_b=
lank">http://autox.team.net/mailman/listinfo/healeys</a></pre>
<pre>=C2=A0</pre>
<pre>Unsubscribe/Manage: <a hre=
f=3D"http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net"=
rel=3D"noreferrer noreferrer" target=3D"_blank">http://autox.team.net/mail=
man/options/healeys/rchaskell@earthlink.net</a></pre>
<pre>=C2=A0</pre>
</blockquote>
</div>
</div>
<p style=3D"margin:0px;font-size:11pt=
;font-family:Calibri,sans-serif">__________________________________________=
_____<br>
Support Team.Net <a href=3D"http://=
www.team.net/donate.html" rel=3D"noreferrer noreferrer" target=3D"_blank">
Suggested annual donation=C2=A0
$12.75<br>
<br>
Archive: <a href=3D"http://www.team=
.net/pipermail/healeys" rel=3D"noreferrer noreferrer" target=3D"_blank">
http://www.team.net/pipermail/healeys</a> <a href=3D"http://autox.team.net/=
archive/healeys" rel=3D"noreferrer noreferrer" target=3D"_blank">
http://autox.team.net/archive/healeys</a><br>
<br>
<a href=3D"mailto:Healeys@autox.tea=
m.net" rel=3D"noreferrer noreferrer" target=3D"_blank">Healeys@autox.team.n=
et</a><br>
<a href=3D"http://autox.team.net/ma=
ilman/listinfo/healeys" rel=3D"noreferrer noreferrer" target=3D"_blank">htt=
p://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href=3D"http=
://autox.team.net/mailman/options/healeys/springer.mike51@gmail.com" rel=3D=
"noreferrer noreferrer" target=3D"_blank">
http://autox.team.net/mailman/options/healeys/springer.mike51@gmail.com</a>=
</p>
</blockquote>
</div>
</div>
</div>
</div>
</blockquote>
</div>
_______________________________________________<br>
Support Team.Net <a href=3D"http://www.team.net/don=
ate.html" rel=3D"noreferrer noreferrer" target=3D"_blank">http://www.team.n=
et/donate.html</a><br>
Suggested annual donation=C2=A0 $12.75<br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/h=
ealeys" rel=3D"noreferrer noreferrer" target=3D"_blank">http://www.team.net=
/pipermail/healeys</a>
<a href=3D"http://autox.team.net/archive/healeys"; r=
el=3D"noreferrer noreferrer" target=3D"_blank">http://autox.team.net/archiv=
e/healeys</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; rel=3D"no=
referrer" target=3D"_blank">Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/h=
ealeys" rel=3D"noreferrer noreferrer" target=3D"_blank">http://autox.team.n=
et/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href=3D"http://autox.team.ne=
t/mailman/options/healeys/michaelsalter@gmail.com" rel=3D"noreferrer norefe=
rrer" target=3D"_blank">http://autox.team.net/mailman/options/healeys/micha=
elsalter@gmail.com</a><br>
<br>
</blockquote>
</div>
_______________________________________________<br>
Support Team.Net <a href=3D"http://www.team.net/donate.=
html" target=3D"_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation =C2=A0$12.75<br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/heale=
ys" target=3D"_blank">http://www.team.net/pipermail/healeys</a>
<a href=3D"http://autox.team.net/archive/healeys"; targe=
t=3D"_blank">http://autox.team.net/archive/healeys</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; target=3D"_bl=
ank">Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/heale=
ys" target=3D"_blank">http://autox.team.net/mailman/listinfo/healeys</a><br=
>
<br>
Unsubscribe/Manage:
<a href=3D"http://autox.team.net/mailman/options/healey=
s/rd_parker@juno.com" target=3D"_blank">http://autox.team.net/mailman/optio=
ns/healeys/rd_parker@juno.com</a><br>
<br>
</div>
</blockquote>
</div>
=EF=BB=BF<span>______________________________________________=
_</span><br>
<span>Support Team.Net <a href=3D"http://www.team.net/donate.=
html" target=3D"_blank">http://www.team.net/donate.html</a></span><br>
<span>Suggested annual donation =C2=A0$12.75</span><br>
<span></span><br>
<span>Archive: <a href=3D"http://www.team.net/pipermail/heale=
ys" target=3D"_blank">http://www.team.net/pipermail/healeys</a>
<a href=3D"http://autox.team.net/archive/healeys"; target=3D=
"_blank">http://autox.team.net/archive/healeys</a></span><br>
<span></span><br>
<span><a href=3D"mailto:Healeys@autox.team.net"; target=3D"_bl=
ank">Healeys@autox.team.net</a></span><br>
<span><a href=3D"http://autox.team.net/mailman/listinfo/heale=
ys" target=3D"_blank">http://autox.team.net/mailman/listinfo/healeys</a></s=
pan><br>
<span></span><br>
<span>Unsubscribe/Manage:
<a href=3D"http://autox.team.net/mailman/options/healeys/he=
aleyguy@aol.com" target=3D"_blank">http://autox.team.net/mailman/options/he=
aleys/healeyguy@aol.com</a></span><br>
<span></span><br>
</div>
</blockquote>
</div>
</div>
<br>
<fieldset></fieldset>
<pre>_______________________________________________
nk">http://www.team.net/donate.html</a>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; target=3D"_blank=
">http://www.team.net/pipermail/healeys</a> <a href=3D"http://autox.team.ne=
t/archive/healeys" target=3D"_blank">http://autox.team.net/archive/healeys<=
/a>
<a href=3D"mailto:Healeys@autox.team.net"; target=3D"_blank">Healeys@autox.t=
eam.net</a>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; target=3D"_blank=
">http://autox.team.net/mailman/listinfo/healeys</a>
s/bspidell@comcast.net" target=3D"_blank">http://autox.team.net/mailman/opt=
ions/healeys/bspidell@comcast.net</a>
</pre>
</blockquote>
<br>
</div>
_______________________________________________<br>
rer" target=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; rel=3D"noreferre=
r" target=3D"_blank">http://www.team.net/pipermail/healeys</a> <a href=3D"h=
ttp://autox.team.net/archive/healeys" rel=3D"noreferrer" target=3D"_blank">=
http://autox.team.net/archive/healeys</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; target=3D"_blank">Healeys@autox.t=
eam.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; rel=3D"noreferre=
r" target=3D"_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
s/michaelsalter@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://auto=
x.team.net/mailman/options/healeys/michaelsalter@gmail.com</a><br>
<br>
</blockquote></div>
--000000000000b8eee705fc49fb02--
--===============7549765463595662963==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============7549765463595662963==--
|