car has a spin on filter and it is not leaking from there. put car on
jackstands and started engine. oil is only coming from motor/trans plate and
hole in bellhousing. having trouble understanding how so much oil can get past
rear bearing even if totally worn, which it is not. checked all breathing
areas and no pressure buildup. could a crack between oil gallery and bearing
area be problem? none visible from underneath bearing cap>
_______________________________________________
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|