Moss still has them: Part# 324-800, $0.49 (and $19.98 for shipping ;)
I think these are the crush type, but for years I've used solid copper,
which is what you used to get. I'll re-use them after annealing to
'cherry red' with a propane torch (was never sure is you should quench
or let air cool for max. softness). I've never found the correct size in
a hardware store or in one of the kits, but haven't looked all that hard.
Bob
On 4/30/2021 5:49 PM, Gary Anderson via Healeys wrote:
> I'm getting ready to change the oil on my Healey -- a chore that was
> taken care of by various shops when the car was in for service, so not
> something I've done for many years -- and know that one of the
> essential parts that makes all the difference is a fresh, unused
> crunch washer to put on when the  plug is put back into the bottom of
> the oil pan.
> I have no idea where to get one these days -- It used to be a very
> cheap item from Moss and I'd order half a dozen every couple of
> years. Any suggestions?
> Gary Anderson
>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|