Thanks guys.? I finally got them out.? After thinking about it for a while I
took two small screwdrivers that the blades would just fit in the slots where
the bottom plate tabs "locked" the top plate in place.? I drove them in the
slot over the "hooks" and tapped the top plate off using a screwdriver and a
small hammer.? Everything came apart quite easily after that.? Pain in the
butt.? Now I can paint the backplate and re-assemble everything.? Painted the
axle casing today after getting it back from the machine shop where it was hot
tanked.? Had new bearings and seals installed in the hubs.? The pumpkin has
been checked out and is serviceable.? I have pre-bent brake lines I bought in
2006 from Doug Finespanner to put on the rear end and the rest of the car.?
Just waiting for the paint to dry now.? Hope I put it all together correctly.
;^)Mike MacLean
Sent from Yahoo Mail on Android
On Sat, Sep 16, 2017 at 4:33 PM, Bob Spidell<bspidell at comcast.net> wrote:
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170917/882dbb8e/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Untitled
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170917/882dbb8e/attachment.ksh>
|