OK. Full tank of non-ethanol gas. Replaced the fuel filter & fuel pump,
cleaned the carb inlet screens and checked the float valves. All new copper
fuel lines about two years ago - SAME PROBLEM.
WHAT NOW ???
Gentlemen,
The BJ7 has been up on jack stands for about 2 months while I did transmission
work. Upon completion, the engine was a little had to start, but finally
started. On the road test, the engine would not rev above 2,200 to 2,400 RPM -
light bucking and missing. I have checked ignition - dwell & timing and fuel
seems OK. Almost feels like the mechanical advance is stuck. But I'm stalled.
Anyone had a similar problem ???
Ed O'Neal
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170905/41d697ae/attachment.html>
|