| ....also as an impecunious student back in the '70s with an MG TD I bought 
oversize spindles. I can't remember now if these went in but were tight, or if 
I drilled the carb body to just under the shaft size. Any way I 'fitted' them 
by lapping them with something like Brasso with the spindle in an electric 
drill.
Cheers
Peter 
Brisbane
BN1 V6
MG TC special (under construction)
From: Neil McDonald 
Sent: Tuesday, January 24, 2017 9:55 PM
To: Michael MacLean 
Cc: Austin Healey 
Subject: Re: [Healeys] SU carb reamer needed
With adequate resources it's clear that addressing both the shaft and bushing 
would be the optimum solution. However as an impoverished student over 50 years 
ago I recall changing out the throttle shafts on my Sprite, at minimal cost, 
convincing myself that this made a difference! Joe Curto wants around $500 to 
rebuild a pair of SUs. Now as a retiree I have more resources but still need to 
manage how much money I spend on my hobby.
If the wear is limited, maybe shaft replacement only might be cost effective?
_____________________ 
Neil McDonald
BN6
Email: nmcd10 at gmail.com
On 23 Jan 2017, at 23:15, Michael MacLean <rrengineer.mike at att.net> wrote:
  Might be a better idea to send out the bodies to someone like Joe Curto and 
have them reamed and re-bushed for a standard shaft.  
  Mike MacLean
  On Monday, January 23, 2017 11:06 AM, Michael Oritt <michael.oritt at 
gmail.com> wrote:
    I have H6 carbs on my 100 Le Mans and the 5/16" throttle shafts are loose.  
I would like to go ream out the bodies and go to the oversized .320" throttle 
shafts.  Moss wants $270.00 for the reaming tool and I do not anticipate I will 
need to do this job again during my lifetime.  Does anyone have one of these 
they would be willing to loan or rent?
    Best--Michael Oritt  
    _______________________________________________
    Support Team.Net http://www.team.net/donate.html
    Suggested annual donation  $12.75
    Archive: http://www.team.net/archive
    Forums: http://www.team.net/forums
    Healeys at autox.team.net
    http://autox.team.net/mailman/listinfo/healeys
    Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/rrengineer.mike at att.net
  _______________________________________________
  Support Team.Net http://www.team.net/donate.html
  Suggested annual donation  $12.75
  Archive: http://www.team.net/archive
  Forums: http://www.team.net/forums
  Healeys at autox.team.net
  http://autox.team.net/mailman/listinfo/healeys
  Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/nmcd10 at 
gmail.com
--------------------------------------------------------------------------------
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170125/c1a5674c/attachment.html>
 |