Thanks, Perry, that's exactly what I need.
I'm making an adapter plate for my Fiat 124 tandem master cylinder because the
mounting flange is at an angle and I want to make sure all the holes line up
and know what the tolerances are I'm dealing with.
Thanks again.
--
Steve Gerow
> -------Original Message-------
> From: Perry <healeyguy@aol.com>
> To: Steve Gerow <steveg@abrazosdata.com>
> Cc: <healeys@autox.team.net> <healeys@autox.team.net>
> Subject: Re: [Healeys] Request Diameter of Master Cylinder hole
> Sent: Sep 08 '13 09:47
>
> Firewall 1.430"
> Pedal bracket 1.455"
> Aloha
> Perry
>
> Sent from my iPhone
>
> On Sep 8, 2013, at 12:31 AM, "Steve Gerow" <steveg@abrazosdata.com> wrote:
>
> > If someone has the master cylinder out of their car, would appreciate it if
> > you could take calipers and give me the exact diameter of the hole in the
> > firewall the MC goes through.
> >
> > If the hole in the pedal box is smaller, would appreciate that dimension,
> > too.
> >
> >
> >
> > Thank you in advance.
> >
> >
> >
> > --
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|