Now that we've got our 100M running, I'm looking to put a good air
filter on the freshly rebuilt engine. We've got the adapter for the
cold air box to a 4" "hard" (heavy paper and foil) tube, and the tube,
but I'm not sure how to affix an air filter to the end of the tube. I'm
considering one of two K&N filters--one would have its flange inserted
into the tube, and one would have the tube inserted into the flange;
i.e. tube into the filter, or filter into the tube.
Any suggestions on how to attach one of the filters? Are the tubes
strong enough to have a filter clamped onto one, or should I clamp the
tube onto the filter flange?
As always, any suggestions appreciated.
Bob
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|