I am hoping that somebody out there knows about shock absorber valve
settings. As many 100 owners know most suppliers only sell the front 6
cylinder version 8002 whereas the correct ones are 6075. The harder
settings are fine for more rigorous driving but a little harsh for
normal road use.
I have a few units that I am reconditioning that are all the same except
for the valve springs. I am in the process of copying the 6075 springs
which hopefully will give the right results in other units but my query
is how does one measure the end result.
I have settings information for a few other types such as the A40 sports
and this is specified as
Compression - 375 in./lb. and Rebound - 950 in./lb.
Does anybody know how to test absorber against such setting information
and does anybody have the settings information for both front and rear
on a standard 100.
Regards
--
John Harper
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|