I've had the Cape rear kit installed for several years and even though the
bottom mounts were bent by the inclusion of too-short shocks, the top mount
IMHO is a good design and shows no distortion whatever.
The Cape kit is similiar to the Koni drawings except it replaces the two small
lengths of angle steel with a full width piece approximately 3 ft long. For
pictures, see:
http://www.pbase.com/stevegerow/healey_rear_suspension
However having said this if I had it to do over again I'd go with the Putzke
kit.
--
Steve Gerow
BN6 with tube shocks
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|