I did what Curt suggests to my BN1 with the Smitty's bellhousing. The BJ8
clutch is light and has geat action.
Best--Michael Oritt
-----------------------------------------------------------
In a message dated 11/4/2009 8:23:04 P.M. Eastern Standard Time,
cnaarndt@gmail.com writes:
The best bet for your BN2 is to use a BJ8 Flywheel which is much lighter
than stock, plus no messing around with lightening. Doing this will also
allow you to use the better diaphragm clutch from the same.
I would do this with my BN1 but the three speed bell housing will foul on
the BJ8 setup.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|