Long shot, but when I replaced the U joints on my 100 I did not get one of
the retaining rings fully seated and so the driveshaft was rotating slightly
out of round and I got noise and vibration that may be similar to your
description, since you mentioned new u-joints and speed sensitive it came to
mind.
A couple thunks to an appropriately sized socket to properly seat the
retaining ring or circlip and the issue was solved.
Greg Lemon
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|