John, et all,
I am referring to the two gear boxes that pass thru the shroud and the wiper
arms atttach to them, not the gear in the motor assembly. The parts book
indicates that the cable is above the gear, but I would like to verify this
because I am helping a friend re-assemble a BJ7 & his is a very tight fit when
oriented this way, perhaps because the tubing around the cable was badly bent.
It seems to fit slightly better with the cable below the gear.
Thanks,
Gary
In a message dated 2/9/2009 10:04:14 A.M. Central Standard Time,
loftusdesign@cox.net writes:
Gary,
The Gear is below the cable. Here's a few pictures to show the assembly ..
http://www.loftusdesign.net/wiper3.jpg
http://www.loftusdesign.net/wiper4.jpg
http://www.loftusdesign.net/wiper5.jpg
Cheers,
John
-----------------
When correctly installed, is the gear (in the gear box) above or below the
actuating cable (on a BJ7)?
Gary
**************A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(http://pr.atwola.com/promoclk/100000075x1218550342x1201216770/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=fe
bemailfooterNO62)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|
