You're better off with a hydraulic oil as used for tractors and
hydrostatic machines and hydraulic rams. Grade AWE68 (20W) It has
antifoaming agents, etc. But engine oil will do in a pinch.... as
will jack oil.
Peter C
=
At 03:35 PM 2/6/2009, Mal Bruce wrote:
>Gents,
>My shop manual states that any good quality mineral oil in 20/20 weight is
>fine to use. Does this mean any engine oil including synthetic would be ok.
>Thanks
>
>Mal
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|