There are many upgrades that can be done depending on what you want
to put into it.
Light flywheel Will allow the engine to rev up much easier,
increase horse power, less load on engine
Light Pistons Less spinning weight more power
Performance Cam This is the heart of the performance, there are
several options here and you will still have a good idle
Headers Any time you make power you have to get
the exhaust out
headers will allow the exhaust to get out faster, this will also help
pull in fresh air fuel mixture
Aluminium Head Less weight, flows better but very pricey
When doing the machine work to the motor you should balance the
motor, line bore block, align rods, deck block and head, Fit guides
and stainless valves and seats.
The cylinder head you can do some polish work to the intake and
exhaust ports.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Feb 5, 2009, at 3:26 AM, john doe wrote:
> looking to rebuild a 3000 motor but looking to get more hp out of
> it what are the available options without putting in a cam that
> would make a rough idle any articles out there
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healeydoc@sbcglobal.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|