Sounds like the Pertronix isn't wired correctly.
bs
--
***************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
'67 Austin-Healey 3000 '56 Austin-Healey 100M
***************************************************************
-------------- Original message ----------------------
From: gardner5@comcast.net
> Just finishing up my BN2 engine rebuild. The engine keeps running after the
> ignition is shut off. Idle is set below spec., timing 6 degrees, and it does
> have a Petronix ignitor. Any ideas?
>
> Joel
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|