Jack -
The top shouldn't leak in the middle. I can drive my BJ8 in a
tropical downpour here in Hong Kong and not leak a drop.
Are you sure you have the correct top rubbers? Also, the aluminum
channel should have no gaps to the frame of the windshield.
Alan
On 6/12/08, Jaap Aeckerlin <j.aeckerlin@gmail.com> wrote:
> Friends,
> some time ago a lister complained about the poor sealing of the soft top
> center part. I had the same problem but have found a solution by
> manufacturing a small bracket and fitting a 'catch and latch' , originally
> meant for the MG 1600. Those interested can contact me off list - I will
> send them a few pictures of how I did it.
> Jack Aeckerlin, The Netherlands
> 1964 BJ8 29432
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|