I'm not sure where this distributer number is coming from but I
believe the numbers should be either 40422 or 40520.
The BMIHT certificate is the only way to be sure.
Randy
Randy Hicks
'56 100M
'62 BN7 MkII
'65 BJ8
'53 MGTD
Healey100M@gmail.com
On Apr 28, 2008, at 6:55 PM, Geatros wrote:
> The body number is stamped on the louvred engine hood on the lelt
> hand side
> lip near the top, if you find this number it should be a
> Factory100M. To fit
> the cold air box the support strut is bent and a notched bracket
> was fitted at
> the factory.The distributor number is 7H1727. The frornt X support
> in front of
> the rad. should be bent to fit the high lift camshaft 1B2892. It
> should have 1
> 3/4 SU carbs.Send the vin number to the British Motor Industy
> Heritge Trust.
>
> Kenny
> Vancouver BC
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey100m@gmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|