Hi Tom,
I had one on my BJ8 for a while. I went back to a stock configuration (Bell
Stainless system) for no big reason other than I wanted it stock. The Monza
system I had is in my shop attic .. complete with downpipes that were powder
coated with heat reflecting material. I adjusted the length of one downpipe
to match the Monza system better. I think it is complete except for clamps
and rubber hangers (which I used the stock hangers as I recall). I used it
for about 2 k miles. Attached are some photos of my car with it on. (It has
about the same amount of wear as the pic with the hardtop shows). It was a
bit lower than a stock configuration and you had to be more careful but it
sounded nice! .. I lengthened it to make it exit past the rear bumper so there
was little blowback into the car (like a stock system). The original length
gave me some odor. All in all I sunk some bucks into making it a good fit.
Drop me a line off the list if you are interested.
Jim Sailer 66 BJ8
[demime 1.01d removed an attachment of type image/jpeg which had a name of
DSC00058.jpg]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
Dsc00253.jpg]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
DSC02673.JPG]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
DSC00479.JPG]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|