Hi everyone,
I have a positive earth BJ8 that I am putting back together. I spent the
day getting the engine into basic tune when I noticed that the tach wasn't
working. I checked the wiring diagram again to assure that everything was
connected correctly, from the tach to the ignition switch to the distributor
and
coil. Everything seems right. I do remember hearing about the direction of
the loop the white wire makes as it passes through the white nylon clip on the
back of the tach to the ignition switch; depending on whether the ground was
positive or negative. I took that out and reversed its direction and still
no function. Any ideas or knowledge as to why tachs don't work??
TIA,
Bill Schumann
**************Start the year off right. Easy ways to stay in shape.
http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|