A real cheap rust dissolver can be made by mixing molasses in a one to nine
ratio with water. It takes a bit longer but works great. 1 - molasses to 9
- water. Just immerse you part in the solution and let it set. May take a
couple of days. It depends on the amount of rust. If the rust is thick you
need to remove the part every couple of days and rinse. At that time it is a
good chance to check progress.
Jim Nichols
BT7
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|