Hi Don:
In your reply, what part of the hub should be rounded on both edges - not
sharp ?
DM / Bj8
From: Don <mailto:don@anglesey.us>
Sent: Friday, October 05, 2007 8:14 AM
Subject: Re: [Healeys] Wheels
If the 60's are not adequate for the loads why would the 48's be used in
stock applications. I used 48's on my 100-6 for years without any
wobble and they were old as the hills. I have since upgraded but 60's
are more than adequate for racing as well. Unless you really want to
spend some $$$$ I would stay with the 60's and have them trued as
another lister suggested and have the drum's/rotors balanced as well.
As for the hubs check to see if they have a sharp edge to them, if both
edges are rounded no need to replace hubs.
Don
57' BN4
-----Original Message-----
Sent: Friday, October 05, 2007 6:38 AM
Subject: [Healeys] Wheels
Hello,
I've asked this of a few of you already, but wonder what you
collectively think about replacing 60 spoke wheels with 72's. I noted
modest vibration and shake when driving my (new old) car home this past
Sunday at 65-70 mph.
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|