Greetings Healeyphiles,
for years, intermittently when I flicked the dash switch to engage the
OD on my BJ8, the OD would fail to engage. If i kept on flicking the switch
on and off, eventualy it would engage, especially if at the same time, I
depressed the accelerator to the floor. The OD and selenoid were rebuilt and
replaced three years ago. The problem existed before the rebuild and after but
is
now becoming a more frequent nuisance. The relay switch on the firewall was
replaced last year. The dash switch is original (1965). Is there any way I can
test the switch to see if it intermittently fails? I would guess that this
occurrs once every twenty times I engage OD.
Thanks for any suggestions.
rich antal
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|