Measured section widths and diameters (inches)
A B C D E F G H
A = Tire Diameter.
B = Loaded Vertical Radius measured at maximum pressure on "best" wheel
width.
C = Increase (+) decrease (-) in ride height.
D = Revolutions per mile as calculated.
Does not take into account slippage of about 3 percent at freeway cruise.
Experienced revolutions are about 103% of calculated. Slippage increases
with road horsepower applied.
E = Tread width.
F = Patch area.
G = Increase in patch area over 590H15 Dunlop Roadspeeds.
H = Tire description.
Best.
Hap 100M
|