Check out John Farrell Auto Parts, http://www.jfarrellauto.com. He
manufactures stainless steel pistons for many cars and there is a
catalog of those he provides at his website. He's located on Long
Island, NY. Most of them cost $20 something a piece.
Lisa and Mark wrote:
> Hello all,
> Thought I'd try my luck to see if anyone has a set of good used Front
> Caliper pistons for a late model BJ8 they'd like to get off their
> shelf. I'm rebuilding my front calipers and my pistons have pitted
> rust areas. Just thought I'd check before plopping down another
> hundred. If you have some that are good send me an email.
>
> Also here's a tip I used today to clean out the dust boot groove, I
> cut some stiff emory paper in the circumference of the piston and used
> that in the groove to remove some of the surface rust in the groove.
>
> Cheers all,
> Mark Buggy
> '67 Bj8
> bugtop@comcast.net
|