Rich, are you sure about the gaskets between each of the three spacers or
insulating blocks. I ask because I took mine apart several months ago and did
not find any gaskets between the three blocks, just on either side of the
stack. I reused the original spacers which are some type of wood and resin
composit, not the black plastic ones from Moss. I just put the rebuilt carbs
back on my car this last weekend. The original spacers are very tight together
after bolting on the carbs. I seriously doubt you would get a vacuum leak here
from the intake manifold vacuum. The head gasket kit I used did not contain
enough gaskets to place one between each of the three insulating spacers.
Ron
BN7
-----Original Message-----
From: Rich C <richchrysler@quickclic.net>
Sent: Mar 2, 2005 2:56 PM
To: John Homonek <jhomonek@mindspring.com>, healeys@autox.team.net
Subject: Re: Need Help with Reinstalling Carbs
Hi John,
Intake manifold, gasket, 3 spacers with gaskets between each, heat shield,
gasket, carb body, gasket air cleaner.
Hope this helps.
Rich Chrysler
|