| To: | healeymk3@hotmail.com, healeys@Autox.Team.Net |
|---|---|
| Subject: | Re: tricarb manifold bolts |
| From: | Drtrite@aol.com |
| Date: | Mon, 24 Jan 2005 09:31:51 EST |
In a message dated 1/24/05 5:55:44 AM Pacific Standard Time, healeymk3@hotmail.com writes: Tri carb intake manifold to carb studs are 5/16 UNC thread into the manifold and 5/16 UNF thread out to the carbs. The stud is 1 3/4 inches long, with the coarse thread 1/2", the shank 1/2" and the fine thread 3/4". I manufacture a stainless steel stud 53K 1477 2"OAL 5/8" of 5/16-24 thread 1/2" of 5/16-18 thread I know they fit my BJ8 Check them under www.dunritetool.com under Healey Products Don Lenschow |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | tricarb manifold bolts, Laurie Wilford |
|---|---|
| Next by Date: | Re: Replacement bumper, David Nock |
| Previous by Thread: | tricarb manifold bolts, Laurie Wilford |
| Next by Thread: | Tricarb manifold bolts, Bruce Starke |
| Indexes: | [Date] [Thread] [Top] [All Lists] |