Hi Kurt,
There is a possibility that the fitting on the bottom of the can is
leaking & running down to appear as a fitting leak. The can to fitting
seal may need replacing.
Dave Russell
BN2
Kurt Leslie wrote:
> 62bt7 both brake and clutch master clys rebuilt and function fine,
> however on lines from reservoir to clys, slight weeping of fluid
> between brake lines and fittings at the clys. I have taken these
> apart several times and cleaned and checked them and seem fine but
> after about 2-3 days these areas are wet with fluid again nothing
> significant but visible. Wrong lines or missing parts? Kurt L.
|