Brett,
I agree with some of the other listers that suspect an ignition problem. I
would suggest that you first check for a spark from one of the plugs. I f no
spark, work your way back to the distributor. Check the rotor to see if it is
turning and also that it is not cracked (been a lot of that lately with
Healeys). Also check your points for proper gap.If the rotor is turning ,
check
the timing. If the rotor is not turning when you crank, you might have a
distributor shaft problem.
I had a similiar problem develop, and finally learned that the distributor
shaft was not turning because the driving dog retaining pin sheared itself off.
Let us know the solution
Larry Wysocki
BN 6
|