Scott,
This is a relatively simple job. New sidescreen rubber sets are readily
available from the usual sources. There is a T shaped channel in the
sidescreen frame corresponding with the T shape of the rubber. Angle one
side of the T into the channel then with a silicone spray lubricant applied
to the area, ease the remaining T edge into the slot using a fairly blunt
edged tool such as a flat blade screwdriver or dulled putty knife. Be
careful not to puncture through the rubber while pressing it into place. The
silicone lube spray makes all the difference.
Rich Chrysler
----- Original Message -----
From: "scott willis" <ahpowered@hotmail.com>
To: <healeys@Autox.Team.Net>
Sent: Saturday, December 18, 2004 3:36 PM
Subject: Side Curtain Rebuild possible?
> Hi gang,
> Can the rubber on these old side curtains be re-installed? It looks
> pressed in. Mine is rotten and much is missing.
>
> There a local glass shop that can replace the plexiglass.
>
> Any suggestions welcome.
>
> Cheers,
> Scott
> Mashed BN7 1960
|