I believe that Moss Motors has the correct "o" rings in available. The
difficult thing about replacing them is getting the retaining springs that
hold the brass fittings down at the bottom of the damper oil chamber out
without scoring the sides of the oil chamber.
Greg Solow
----- Original Message -----
From: "Scott Janzen via Fot" <fot@autox.team.net>
To: "Scott Janzen" <sjanzen@me.com>; "'Friends of Triumph' Triumph"
<fot@autox.team.net>
Sent: Friday, October 13, 2023 2:48 PM
Subject: Re: [Fot] O rings in tr6 strombergs
> Should have said brass fittings.
> Sent from my iPhone
>
>> On Oct 13, 2023, at 5:04â?¯PM, Scott Janzen <sjanzen@me.com> wrote:
>>
>> I need to replace the o-rings on the bronze fitting at the bottom of the
>> carb. Looks like they are 5/8â?? ID. Does anyone have the OD or the
>> thickness dimension? Figured Iâ??d just get some from McMaster.
>> Scott
>> Sent from my iPhone
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/sjanzen@me.com
>>
>>
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/gregmogdoc@surfnetusa.com
>
>
>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|