Using Black or Red Silicone Gasket Sealant on one side of gasket.
Allow to cure overnight or 24 hours.
Low torque application. (Crushing the gasket breaks the seal)
Our TR4 remains leak free after nine years.
Once Installed, Remove & Replace valve cover. Thatâ??s all.
Cure time and low torque application is the key to success.
Joe Alexander
4505 Donald Dr
Cedar Falls, IA 50613
The-vintage-racer.com
Gasketinnovations.com
Cell: 319.464.4711
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|