fot
[Top] [All Lists]

[Fot] Supplier for Brake shoes for TR4

Subject: [Fot] Supplier for Brake shoes for TR4
From: fubog1 at aol.com (fubog1)
Date: Mon, 23 Oct 2017 13:17:11 -0400
It sure is, the center hole and stud holes require slight mods, but they will 
crack with hard use (racing).
With frequent inspection you can catch the cracks early and monitor them.
IF you can find OEM, I was looking awhile back and all that was available was 
repro.
Glen

 

 

 

-----Original Message-----
From: John Styduhar <johnstydo at gmail.com>
To: fubog1 <fubog1 at aol.com>
Cc: Timothy Murphy <timmmurphh at gmail.com>; Triumph 'Friends of Triumph <fot 
at autox.team.net>; ryan.murphy <ryan.murphy at fdlco.wi.gov>
Sent: Mon, Oct 23, 2017 12:40 pm
Subject: Re: [Fot] Supplier for Brake shoes for TR4



?The OEM Datsun Z finned aluminum drum is a nice retrofit.  Several of the 
racers and street enthusiasts have installed them.  The conversion doesn't 
require much modification.  Lighter weight and cooler running that steel drums. 
 Like Triumph parts, the original Z drum is what you want, not the aftermarket 
piece.  Can be machined to 9.055" dia. Lot's of info in the FOT archive.      ?





On Mon, Oct 23, 2017 at 7:37 AM, fubog1 via Fot <fot at autox.team.net> wrote:

As the drum gets thinner/closer to the regrind limit, it will have a tendency 
to warp & get bell-shaped.
I can't explain the difference in the cost between the drums, but in my 
experience the cheap drums/discs/etc are cheap for a reason, and not suitable 
for hard use.
Glen

 

 

 

-----Original Message-----
From: timmmurphh--- via Fot <fot at autox.team.net>
To: fot <fot at autox.team.net>
Cc: ryan.murphy <ryan.murphy at fdlco.wi.gov>
Sent: Sun, Oct 22, 2017 7:59 pm
Subject: Re: [Fot] Supplier for Brake shoes for TR4



Thanks to all who replied regarding the brake shoes.  I?ve ordered a set from 
Ted Schumacher.  The drums didn?t clean up with 0.025 removed from a side 
(final size 9.050).  It would take another 0.020 on a side to clean the drums 
up making them 9.090 diameter.  I think that is probably too much to take off 
but I?m not sure.  We have a set of original drums on a street car rear axle 
that we could try and clean up or I can order some new ones.  There seem to be 
two type of drums available; $27 ones and $58 ones (Moss).  Nothing in the 
specs as to why the difference.  Any input on drums would be appreciated.
 
Tim & Ryan Murphy
1961 TR4 #317 BRG
 

From: timmmurphh at gmail.com [mailto:timmmurphh at gmail.com] 
Sent: Wednesday, October 18, 2017 11:32 AM
To: fot at autox.team.net
Cc: ryan.murphy at fdlco.wi.gov
Subject: Supplier for Brake shoes for TR4

 
The left rear brake shoe lining came off the shoe at Blackhawk Farms last 
weekend.  I am looking for suppliers for brake shoes with riveted linings as 
the one that came off was a ?glued? lining.  I?d also like to specify the 
lining to use, the Carbotech linings whose pads we use and like on the front 
discs.  I?m also open to any suggestions about what to use for the rear brake 
shoes.  The above would just be my preference based on the latest experience.  
I see Revington has competition shoes with ?Mintex 20? linings I think for 
about $120 a set which appear to be rivited.  Anyone with experience with these 
brake shoes and linings?
 
Thanks in advance for any info you can provide.
 
Tim & Ryan Murphy
1961 TR4 #317 BRG

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive




_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive







-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20171023/31e32517/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>