fot
[Top] [All Lists]

[Healeys] Healey Parts

Subject: [Healeys] Healey Parts
From: RFBegani at speakeasy.net (Robert F. Begani)
Date: Thu, 20 Apr 2017 04:53:38 -0400
I just loved Perry's detailed accurate report on the history of finding
parts for our Healey's.  

 

On that subject, last spring I removed the engine in my BJ8 and had it
machined.  My good friend who is a retired machinist and I assembled it and
then I left Florida for the summer.  He finished it and put it in my garage.
So after a year of scrubbing the oil and grease from the engine bay , frame,
touch up painting and so on we are installing the engine and trans next
week.  During our discussions this week about did you???, he said "did I
tell you about the water pump?" 

 

It seems the frame of the pump did not meet the opening on the engine.  As a
machinist he always checks to see if one part is a mirror image of the other
part when joining two parts.  He ground out 3/4" from one side of the pump
opening.  He suggests the engine might run cooler with a larger flow of
water through the pump which was purchased and installed 5 years ago from a
well-known supplier so I did not replace it on the engine rebuild.  So much
for today's parts!  

 

Still they are better and easier to obtain than days gone by.

 

Bob Begani

BJ8 67

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170420/9033b737/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>