fot
[Top] [All Lists]

[Healeys] BJ8---Speedometer disassembly

Subject: [Healeys] BJ8---Speedometer disassembly
From: eschulz at frontiernet.net (Elton Schulz)
Date: Thu, 13 Apr 2017 23:18:21 -0400
References: <20170413185627.RGLJW.15771.root@pamxwww05-z01>
It should pull off by grabbing the base of the needle. If not, you can 
try twisting it, but be sure to hold the guts from a lamp hole in the 
back to keep them from turning. If that doesn't work, some people have 
actually fabbed a puller in which the legs of the puller sit in the two 
screw holes used for holding the speedo face.
Anthony Rhodes has a good writeup on repairing Smiths speedos. I don't 
have a link for you, but I think you can get it by googleing it. Also 
John Sims' site may have a link to it.
Good luck,
Elton

On 4/13/2017 6:56 PM, Tom Felts wrote:
> I need to pull the guts out of my speedo.  Have removed (screws, etc and the 
> push-counter end)  Trying to get the face off it appears you need to remove 
> the needle.  How do you remove the needle (do you pry it off)---this will 
> allow removal of the face so you can get the guts out.
>
> thanks
> tom
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eschulz at 
> frontiernet.net
>
>


<Prev in Thread] Current Thread [Next in Thread>