Scott, I would like to buy these.
Thanks
Ashley Page
Sent from my iPad
> On Apr 29, 2015, at 2:35 PM, Scott Janzen via Fot <fot@autox.team.net> wrote:
>
> So, I ordered a set of Revolutions for my race GT6 from England - reasonable
> price, all in with shipping $720.
>
> However, the wheels that were supposed to be fitted with steel seats at the
> bolt holes and take standard wheel nuts, instead have no steel inserts and
> will only take narrow/tuner nuts. The narrow nuts require short studs (so
> you can fit a hex wrench inside the nut, which does not work at all with the
> long wheel studs on my race car. I also wanted the steel seats as the wheels
> get removed and refitted a lot, maybe not essential and certainly not on a
> street car, but it's what I thought I was getting.
>
> Long story short, the seller is offering them to me at half price or I can
> ship them back, so I am passing on the 1/2 price offer as I don't want to
> keep them. I can ship or bring to the Kastner Cup. $360 for the four plus
> shipping
>
> Wheels are brand new in original packing, 13"x6", 4-1/4" backspace, 3.75"
> bolt circle, complete with wheel nuts. Photo attached, or if it doesn't come
> through, send me an email. Note, the stock photo does not show the wheels
> bored for the specific bolt hole circle - once bored as mine are, the seat is
> recessed in a 0.85" bore that accepts the narrow lug nuts.
>
> <Screen Shot 2015-04-29 at 2.30.35 PM.png>
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/apage2@prosystembrakes.com
>
>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|