Bill, can you outline a good procedure for getting all of the air out of the
system? Jim
________________________________
From: "BillDentin@aol.com"
<BillDentin@aol.com>
To: ablake2@austin.rr.com; fot@autox.team.net
Sent: Fri,
February 8, 2013 8:39:16 AM
Subject: Re: [Fot] TR coolant pressure/flow
Greg...
While Tony Drews provided some bench mark numbers for you, I can'l
help but
chime in with the importance of a good "bleed" technique for every
time you
drain and refill your system. If you do not bleed properly, you
will end
up dealing with air pockets and bubbles. Kas has told me that even
when he
had trusted assistants on his race teams...'filling the cooling
system' was
one thing he always did himself. That's saying something, and is
an
indication of its importance with our TR engines.
Bill Dentinger
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive:
http://autox.team.net/mailman/options/fot/sherryjimmy6116@att.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|