Rob,
With a balance bar and two different diameters things might get a bit
confusing as far as balance.
It may work fine I just don't have that experience.
I just put on a pair of 3/4 wilwood masters to reduce pedal travel. In doing
so the pedal effort goes up.
According to Carrol SmithB a stiff pedal / high effort is better so that's
what I did.
I used 3/4 bores front & rear to keep the bias simple ( in my mind anyway )
jim g
From: "rob" <19to1tr6@comcast.net>
To: fot@autox.team.net
Sent: Thursday, June 4, 2009 9:30:58 AM GMT -07:00 Chihuahua / La Paz /
Mazatlan
Subject: [Fot] brakes
Can anyone explain why a brake system with a balance bar B and duel masters
would have different size masters ie a 5/8 bore for the front and a 3/4 bore
for the rear B also can anyone B sujest the correct size masters for a TR6
with
stock front brakes and rear disc brakes with a 4 piston willwood caliper.
Thanks B B rob
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|