> It's even easier if you've got a compressor with a pressure regulator.
> Just adjust the pressure up until the cap opens.
True, if you can reliably detect when it opens. In my case it was leaking
even below 'opening' pressure. I wasn't sure if the problem was the cap or
elsewhere, hence the static test (which showed that both an old cap and a
new one failed to hold even the rated 4 psi).
-- Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|