Re: [Fot] Flywheel Fasteners for Steel Flywheels

[REK46@aol.com]

Be sure the flywheel bolts have an un-threaded shank to get at least through 
most of the flywheel thickness(without bottoming on the shank or the crank 
depth when torqued...full threaded bolts will machine the crank holes.



**************
Need a new ride? Check out the largest site for U.S. used car listings at 
AOL Autos.
      (http://autos.aol.com/used?NCID=aolcmp00300000002851)
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot